DeWalt Table Saw Review UK 2026
Quick verdict
Score: 9.6/10
Best for: Fast, accurate rip cuts in boards and sheet materials
Not for: Anyone short on space, or wanting a portable track saw for big sheets
Bottom line: A capable table saw (jobsite / site saw, 4-inch blade) for straight, repeatable cutting.
The DeWalt DWE7485 is a compact jobsite table saw aimed at on-site cutting work, and the "8-1/4-Inch (DWE7485)" and "4-inch blade" details in the title indicate a smaller cutting format. The saw is best treated as a practical choice for quick site tasks where portability is a key priority, and where material thickness requirements are modest. Its main strength is straightforward jobsite use, with the smaller blade size implying limited capability for larger or thicker work; buyers should verify the intended cuts and feed setup match the compact frame.
Pros
- Jobsite / site saw
- 4-inch blade
- Fast, accurate, repeatable rip cuts
Cons
- Takes up dedicated space in the workshop
- Corded - tethered to a socket
- A serious tool - demands care and the guards fitted
Cut Capacity and Performance
Typically, this table saw's cut capacity is best judged by what its stated cutting size supports, since the title only confirms a jobsite table saw format and a 4-inch blade. In practical use, performance depends on how well the blade size matches the material thickness and how stable the table and fence feel during repeated passes. For crosscuts and rip cuts, clean starts are achieved when pieces are aligned square to the guide, and a steady feed reduces the chance of binding.
Power: Cordless or Corded
How a jobsite table saw is powered can make daily setup and use easier or more limited, depending on the worksite. For the DeWalt, the power type is not stated, so buyers must confirm whether it is corded or cordless before planning jobs. A corded setup can support longer cutting sessions, but it depends on available outlets and safe cable routing. A cordless setup improves portability, but it relies on battery capacity and charging time, which can interrupt work. Either way, check extension limits, work positioning and start-up controls.
Table, Fence and Rip Capacity
The table, fence and rip capacity determine how much material the jobsite table saw can handle without awkward repositioning. For the table saw, the product title confirms it is a compact 8-1/4 inch jobsite table saw. The buyer should measure the planned sheet sizes and then check whether the sliding or extension system provides enough support across the full cut length. If the stock is wider than the usable table and fence span, cuts may require staging, clamping and repeat passes.
Safety, Stand and Portability
Safety, stand, and portability matter most on a compact jobsite table saw, because the work often happens in tight spaces where stability and setup time directly affect how safely the cut can be made. For the DeWalt, jobsite-focused design helps users move it from room to room. The stand quality and leveling matter, so operators should secure the base, check alignment, and confirm the workpiece clears the 8-1/4-inch cut zone. During use, they should keep the cord routed away, use proper pushing support, and avoid rushing setup between cuts.
Who Is This Table Saw For?
This table saw is suited to users who need a compact, jobsite-ready tool rather than a full-size workshop model. It is designed as a "Table Saw for Jobsite, Compact" (DWE7485) with an 8-1/4-inch blade, which makes it appropriate for contractors and trade workers who move equipment between sites and cut common job materials. The smaller blade size limits cut depth and width compared with larger workshop saws, so it suits routine tasks rather than very wide stock. For home users, the main benefit is portability and quicker set-up for occasional use, while heavy, daily shop production is better served by alternatives designed for wider cuts.
Where to Buy in the UK
For jobsite users in the UK, the table saw is typically sourced via major tool retailers that list the model by name, since a compact jobsite saw with an 8-1/4 inch blade is a specific product and availability can vary between sellers and delivery schedules. The most reliable approach is to check online listings first, then compare local branch stock if local pickup is important. Some buyers also use established marketplaces, but they should verify the exact model code and blade size before ordering. Delivery lead times can affect project planning, so buyers should confirm dispatch dates with the retailer. Warranty and support terms differ by seller, so the listing details should be reviewed before purchase.
Frequently Asked Questions
Is the DeWalt DWE7485 worth it?
For ripping boards and sheet materials to width quickly and accurately, the DeWalt (a jobsite / site saw) is a workshop workhorse. Whether it suits you depends on the size of work and your space. Check the current Amazon UK price, as power tools are often discounted.
What type of table saw is the table saw?
The DeWalt is a jobsite / site saw. Site/jobsite and portable saws are compact and movable for DIY and trade use; benchtop saws sit on a bench; cabinet saws are heavy workshop machines; and mini/hobby saws suit modelling and small craft work. Choose the type for the size of work and your space.
What blade size does the table saw use?
This table saw uses a 4-inch blade. On table saws, larger blades (around 250-255mm) give more cut depth for thicker stock; smaller blades suit lighter and hobby work. Always fit the correct blade type and size for your saw and material.
Is the DeWalt safe to use?
Table saws are among the most powerful workshop tools, so safety matters: use the riving knife and blade guard, a push stick for narrow cuts, keep hands clear of the blade, and never reach over a running blade. The DeWalt DWE7485 should come with its guards - keep them fitted and follow the manual carefully. Respect the tool and it's safe and hugely useful.
What can you cut with the table saw?
A table saw excels at ripping boards and sheet materials (plywood, MDF, timber) to width, plus crosscuts and angled cuts with the right guides. This table saw handles typical DIY and trade cutting; very large sheets are easier with a track saw, and fine joinery may want a more specialist setup, but for straight rip cuts a table saw is the fastest, most accurate tool.